Urbaco Logo

Midland Gate - High quality Urbaco bollards

Security Bollards & Automatic bollards

 


Urbaco Automatic Rising Bollards Play Video

Midland gate Automation Ltd. specialise in the complete installation of the entire URBACO range - the ideal solution for access control of a public or private street for vehicular traffic.

The Automatic Rising Bollard sinks into the ground in less than 3 seconds (adjustable) by means of a remote control device ), thus clearing the way for traffic and rises back once the vehicle has passed through.

This system is very easy to use and its applications are varied. It enables not only access control to a private housing estate, company grounds or any street, but also gives an answer to urban needs in terms of remote on-line technical centralised supervision.

Urbaco Automatic Bollards

In case of power outage, the bollard goes down by gravity. As an option, negative security is available, locking the bollard upwards even in a power outage. This is especially useful for high security situations.

Limit switch captors detect the bollard status - up, down or in motion - to activate optional peripherals such as traffic lights, control logic etc. An optional internal antifreeze heater is also available enabling the bollards to be operated in areas of extreme cold.

Urbaco automatic rising bollards are available in 3 diameters:

120mm (4.72") •  200mm (7.87") •  250mm (9.84")

They are also available in two separate heights above ground:

500mm (19.68") • 750mm (29.52")

They are supplied as standard in Anthracite Grey unless otherwise specified, but are available in the following satin finish thermosetting polyester powder painted colours:

  ANTHRACITE
GREY
RAL 7016
(as standard)
BRONZE
KHAKI GREEN
(SPECIAL)
STEEL
GREY
(SPECIAL)
TRAFFIC
RED
RAL 3020
METALLIC
GREEN
RAL 6009
Urbaco Automatic Bollard diagram

Semi Automatic Retractable Bollards

Semi-automatic manual bollards are set in motion with a key that unlocks the mechanism. A push on the bollard’s head will make it sink into the ground; locking in the tracted position is automatic. A simple turn of the key will make the bollard rise back by itself and lock in the upward position. Although these bollards cannot be operated by remote control they have the advantage of being easy and wire-free to install. The locking mechanism is protected by a bronze flap door. The sliding locking device consists of a stainless steel rod and bolting lock with automatic wear compensation. This ensures the complete long term locking of the bollard in both the upward and downward position no matter the number of operation cycles.

Access control in
three easy steps.

1. Unlock
2. Turn
3. Lift

Removable Bollards and Posts

The posts and bollards shown here feature the Fixator base, allowing them to be easily removed from the ground. With the turn of a key, the bollard may be removed from it’s lodgings, the Fixator cover placed where the bollard was, creating a smooth surface while clearing the way for traffic or passers-by.

An optional second Fixator base installed at the side of the accessway allows the bollard to be stored safely out of the way.

electric gates | security barriers | bollards | security gates | automatic gates | automatic bollards | turnstiles | access control | sliding gates | electric garage doors | electric gates nottingham | electric gates bimingham

Midland Gate Automation supply Electric Gates throughout the UK including Nottingham, Birmingham & London.

Electric Gates Nottingham